Simulasi dan Penalaan PID pada Kapal Pengukur Volume Sedimen Menggunakan MATLAB Simulink

Authors

  • Christin Hutagaol Universitas Sultan Ageng Tirtayasa
  • Desmira Desmira Universitas Sultan Ageng Tirtayasa
  • Nur Rohima Oktiana Universitas Sultan Ageng Tirtayasa
  • Muhammad Akmal Raihan Universitas Sultan Ageng Tirtayasa
  • Egi Tri Saputra Universitas Sultan Ageng Tirtayasa
  • Adam Falrain Wibowo Universitas Sultan Ageng Tirtayasa

DOI:

https://doi.org/10.55606/juitik.v6i1.2131

Keywords:

Control System, MATHLAB Simulink, Overshoot, Reference Journal, Simulation

Abstract

The research aimed to evaluate the accuracy of control system simulations using MATLAB Simulink by comparing the results with those from reference journals. This study employed simulations and comparative analysis without any hardware testing. The system model and control parameters were derived from the reference journal, and simulations were conducted to obtain the system response in the form of time-domain waveforms. The analysis focused on comparing key system response characteristics, including target point attainment speed, overshoot, and steady-state stability. The results revealed that the waveform of the simulation response closely matched the patterns observed in the reference journal, with a high degree of agreement in terms of response characteristics. MATLAB Simulink simulations were validated as a reliable tool for system response analysis, as the small differences observed did not significantly impact the overall conformity of the response characteristics. This study confirms that MATLAB Simulink is effective for validating control system performance based on reference journal simulations.

References

Ainudin, F. H., Ashlah, M. B., & Nugraha, A. T. (2022). Pengontrol kecepatan respon motor dengan PID dan LQR. In Seminar MASTER PPNS (Vol. 7, No. 1).

Anggrila, B., & Astrid, E. (2024). Rancang bangun DC chopper empat kuadran untuk motor DC dengan monitoring Simulink MATLAB. MSI Transaction on Education, 5(4), 185-196. https://doi.org/10.46574/mted.v5i4.153

Hartanto, S. (2022). Tegangan motor DC terhadap berat barang pada ban berjalan. Jurnal Elektro, 10(2), 174-181.

Hidayat, A. R., Risdhayanti, A. D., Fitri, Permatasari, D. A., & Wahono, W. T. (2024). Pemodelan identifikasi sistem untuk pengaturan kecepatan motor DC dengan kontrol PID. Jurnal Elkolind, 11(1), 253-262. https://doi.org/10.33795/elkolind.v11i1.5409

Hudati, I., Aji, A. P., & Nurrahma, S. (2021). Kendali posisi motor DC dengan menggunakan kendali PID. Jurnal Listrik, Instrumentasi dan Elektronika Terapan, 2(2), 25-30. https://doi.org/10.22146/juliet.v2i2.71148

Kurniawan, F., Maulana, Y. Z., & Christianti, R. F. (2022). Sistem kendali level ketinggian air berbasis fuzzy control menggunakan Simulink. Techné: Jurnal Ilmiah Elektroteknika, 21(1), 17-30. https://doi.org/10.31358/techne.v21i1.287

Masfufiah, I., Firmansyah, R. A., Hamid, A., & Oetomo, S. (2021). Implementasi kontrol suhu menggunakan metode PID pada aplikasi inkubator infant warmers. Cyclotron, 4(1).

Nuroctavia, A. F., Murtono, A., & Priyadi, B. (2021). Sistem kendali suhu dan kelembapan pada proses fermentasi tempe dengan metode PID. J. Elektron. dan Otomasi Ind, 8(3), 261. https://doi.org/10.33795/elk.v8i3.304

Purba, K. (2024). Sistem kendali dalam mesin otomatis: Teknologi dan aplikasinya. Circle Archive, 1(6).

Putri, M. D. I., Ma'arif, A., & Puriyanto, R. D. (2022). Pengendali kecepatan sudut motor DC menggunakan kontrol PID dan tuning Ziegler Nichols. Techno (Jurnal Fakultas Teknik, Universitas Muhammadiyah Purwokerto), 23(1), 9-18. https://doi.org/10.30595/techno.v23i1.10773

Santosa, S. P., & Nugroho, M. W. (2021). Rancang bangun alat pintu geser otomatis menggunakan motor DC 24 V. Jurnal Elektro, 9(1), 38-45.

Sudrajat, R., & Rofifah, F. (2023). Rancang bangun sistem kendali kipas angin dengan sensor suhu dan sensor ultrasonik berbasis Arduino Uno. Remik: Riset dan E-Jurnal Manajemen Informatika Komputer, 7(1), 555-564. https://doi.org/10.33395/remik.v7i1.12082

Sukowati, A. D. S., Budi, E. S., & Radianto, D. (2023). Sistem kendali PID aplikasi mini plant water flow berbasis Arduino. J. Elektron. dan Otomasi Ind, 10(3). https://doi.org/10.33795/elkolind.v10i3.3677

Ushofa, B. D., Anifah, L., Buditjahjanto, I. G. P. A., & Endryansyah. (2022). Sistem kendali kecepatan putaran motor DC pada conveyor dengan metode kontrol PID. Jurnal Teknik Elektro, 11(2), 332-342.

Zulkifli, R. S. (2021). Pengaruh kendali kecepatan motor DC pada chopper drive. Jurnal Teknik Elektro dan Komputer TRIAC, 8(2), 39-43. https://doi.org/10.21107/triac.v8i2.11277

Downloads

Published

2026-02-21

How to Cite

Christin Hutagaol, Desmira Desmira, Nur Rohima Oktiana, Muhammad Akmal Raihan, Egi Tri Saputra, & Adam Falrain Wibowo. (2026). Simulasi dan Penalaan PID pada Kapal Pengukur Volume Sedimen Menggunakan MATLAB Simulink. Jurnal Ilmiah Teknik Informatika Dan Komunikasi, 6(1), 595–603. https://doi.org/10.55606/juitik.v6i1.2131

Issue

Vol. 6 No. 1 (2026): Maret : Jurnal Ilmiah Teknik Informatika dan Komunikasi

Section

Articles

License

Copyright (c) 2026 Jurnal Ilmiah Teknik Informatika dan Komunikasi

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Similar Articles

<< < 1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)