Implementasi NodeMCU ESP8266 dan Sensor Cahaya Pada Lampu Berbasis Internet Of Things
DOI:
https://doi.org/10.55606/juisik.v2i1.514Keywords:
internet of things, nodemcu esp8266, ldr sensor, lightsAbstract
The conventional use of led lights (Light Emitting Diode) is still considered inefficient in its control. Utilizing technology in the field of the Internet of Things greatly helps the efficiency of time and movement in controlling lights in real time or real through connected internet networks. In previous research, an automatic light switch and home temperature monitoring using VB. Net and Arduino. In this research, the lights will be integrated into the Internet of Things using NodeMCU ESP8266 and ldr (Light Dependent Resistor) sensors to detect incoming light and can be controlled through the Blynk application. This research is designed using SDLC (System Development Life Cycle) method of waterfall model and Arduino IDE as text editor application to write and upload code to NodeMCU ESP8266. The result of this research, the lamp can be controlled through the Blynk application, when the button is turned on and off the lamp acts on or off and the lamp can react on and off when it reaches a certain incoming light indicator on the LDR (Light Dependent Resistor) sensor.
References
P. Jendela Otomatis, M. Albet, P. Wira Ginta, and A. Sudarsono, “PEMBUATAN JENDELA OTOMATIS MENGGUNAKAN SENSOR CAHAYA,” 2014.
T. Dewi Hendrawati and I. Lesmana, “Rancang Bangun Saklar Lampu Otomatis dan Monitoring Suhu Rumah Menggunakan VB. Net dan Arduino,” 2016.
M. H. Widianto, “Pengaplikasian Sensor Hujan dan LDR untuk Lampu Mobil Otomatis Berbasis Arduino Uno,” vol. 1, no. 2.
Rahmat Saepul, Nurdiasari Anna, and Zaenurrohman, “The Implementation of NodeMCU ESP8266 for Smart Lamp in the Cilacap State Polytechnic Campus Area,” Journal of Telecommunication Network (Jurnal Jaringan Telekomunikasi), vol. 12, no. 2, 2022.
P. D. P. Silitonga, D. El, and R. Purba, “IMPLEMENTASI SYSTEM DEVELOPMENT LIFE CYCLE PADA RANCANG BANGUN SISTEM PENDAFTARAN PASIEN BERBASIS WEB,” Jurnal Sistem Informasi Kaputama (JSIK), vol. 5, no. 2, 2021.
A. ’Satriadi, “Wahyudi,” and Y. ’Christiyono, “PERANCANGAN HOME AUTOMATION BERBASIS NodeMCU,” vol. 8, Mar. 2019, Accessed: May 24, 2023. [Online]. Available: https://ejournal3.undip.ac.id/index.ph p/transient
D. Aribowo, G. Priyogi, and S. Islam, “APLIKASI SENSOR LDR (LIGHT DEPENDENT RESISTOR) UNTUK EFISIENSI ENERGI PADA LAMPU PENERANGAN JALAN UMUM”.
A. ’Razor, “Breadboard Arduino: Pengertian, Prinsip Kerja, dan Jenisnya,” May 2020. https://www.aldyrazor.com/2020/05/ breadboard-arduino.html (accessed May 24, 2023).
Y. ’Juliansyah, “Kode Warna Resistor 1K ( DILENGKAPI GAMBAR ),” Mar. 11, 2022. https://www.ruangteknisi.com/warnaresistor-1k/ (accessed May 24, 2023).
Andi Adriansyah, Setiyo Budiyanto, Julpri Andika, Arif Romadlan, and Nurdin Nurdin, “Public street lighting control and monitoring system using the internet of things,” AIP Conf Proc, 2020.
E. Ihsanto and M. Dawud, ““Sistem Monitoring Lampu Penerangan Jalan Umum Menggunakan Mikrokontroler Arduino dan Sensor LDR dengan Notifikasi SMS,” J. Teknol. Elektro, vol. 7, May 2016.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Jurnal ilmiah Sistem Informasi dan Ilmu Komputer
This work is licensed under a Creative Commons Attribution 4.0 International License.
