Improvement Performa Gudang Medium Mile dengan Menggunakan Value Stream Mapping Case Study: Warehouse Medium Mile di Kota Palembang
DOI:
https://doi.org/10.55606/jurimbik.v3i1.360Abstract
Gudang middle mile memiliki fungsi sebagai penghubung antara first mile dan last mile delivery [1]. Sebagai Gudang middle mile Palembang adalah Gudang besar penghubung untuk daerah sumatera selatan, Gudang ini memiliki SLA KPI yang kurang baik selama bulan November 2021- januari 2021 yaitu late picking, sending dan sorting sebanyak 2870 AWB. Setelah dilakukn define menggunakan Value Stream Mapping dan improvement menggunakan pendekatan re-layout dan Job leveling maka didapatkan perbaikan kesalahan yang terjadi pada bulan februari-april 2022 yaitu sebanyak 289 AWB. Dari hasil Value stream mapping future state didapatkan total waktu proses yang lebih baik setelah dilakukan perbaikan dengan menggunakan re-layout dan job leveling. Selain itu dalam penelitian didapatkan jika terdapat optimalisasi kebutuhan man power yang sebelumnya sebanyak lima orang menjadi empat orang.
References
E. Macioszek, “First and last mile delivery - problems and issues,” Adv. Intell. Syst. Comput., vol. 631, pp. 147–154, 2018, doi: 10.1007/978-3-319-62316-0_12.
L. M. Greening, M. Dahan, A. L. Erera, and H. M. Stewart, “Middle Mile Consolidation Network Design with Fixed Origins and Destinations: Time-Constrained Rate-Based Models,” pp. 1–38.
A.-V. Alamsyah, N. Purevdorj, and A. Bateman, “Carbon Efficient Network Design: Evaluating the Trade-Offs Between Carbon Emissions, Transportation Cost, and Delivery Time for a Middle-Mile Distribution Network,” pp. 1–79, 2021.
Y. Fihartini, A. Helmi, M. Hassan, and Y. M. Oesman, “Perceived health risk, online retail ethics, and consumer behavior within online shopping during the covid-19 pandemic,” Innov. Mark., vol. 17, no. 3, pp. 17–29, 2021, doi: 10.21511/im.17(3).2021.02.
Laporan statistik E-Commerce Indonesia tahun 2021-2022 Badan Pusat Stastistik Indoensia
R. U. A. Fauzi, “Does Trust Mediation Benefits And Risk Consumer Perceptions Increase E-Commerce Buying Intention,” Asian J. Manag. Entrep. Soc. Sci., vol. 1, no. 1, pp. 25–44, 2021.
P. Ketchanchai, K. Tangchaidee, and N. Kongprasert, “Lean Warehouse Management through Value Stream Mapping: A Case Study of Sugar Manufacturing Company in Thailand,” 2021 IEEE 8th Int. Conf. Ind. Eng. Appl. ICIEA 2021, pp. 192–196, 2021, doi: 10.1109/ICIEA52957.2021.9436732.
M. Gobetto, Operations Management in Automotive Industries. 2014. [Online]. Available: http://link.springer.com/10.1007/978-94-007-7593-0
U. Amrina and M. U. R. Fitrahaj, “An Application of Value Stream Mapping to Reduce Waste in Livestock Vitamin Raw Material Warehouse,” Int. J. Sci. Res., vol. 9, no. 3, pp. 1541–1546, 2020, doi: 10.21275/SR20329062345.
G. Richards, “Warehouse Management: A Complete Guide to Improving Efficiency and Minimizing Costs in the Modern Warehouse (Google eBook),” p. 344, 2018, [Online]. Available: http://books.google.com/books?id=fe0O6Q16mzEC&pgis=1
A. Muñoz-villamizar et al., “Muñoz-Villamizar;Santos;García - Green value stream mapping approach to improving productivity an... (1).pdf,” vol. 68, pp. 608–625, 2019.
D. Maryadi, “Lean Six Sigma DMAIC Implementation to reduce Total Lead Time Internal Supply Chain Process,” pp. 2086–2096, 2021.
P. Korytkowski and R. Karkoszka, “Simulation-based efficiency analysis of an in-plant milk-run operator under disturbances,” Int. J. Adv. Manuf. Technol., vol. 82, no. 5–8, pp. 827–837, 2016, doi: 10.1007/s00170-015-7442-2.
I. M. Fahturizal and D. A. Taufik, “Value Stream Mapping ( VSM ) Implementation as an Effort to Reduce Delays in the Procurement Process at PT . DI,” vol. 2, no. 3, pp. 198–210, 2021.
D. Klimecka-Tatar, “Value Stream Mapping as Lean Production tool to improve the production process organization - Case study in packaging manufacturing,” Prod. Eng. Arch., vol. 17, no. 17, pp. 40–44, 2017, doi: 10.30657/pea.2017.17.09.
P. Saraswat, D. Kumar, and M. Kumar Sain, “Reduction of Work in Process Inventory and Production Lead Time in a Bearing Industry Using Value Stream Mapping Tool,” Int. J. Manag. Value Supply Chain., vol. 6, no. 2, pp. 27–35, 2015, doi: 10.5121/ijmvsc.2015.6203.
S. Sudarto, “Penerapan konsep lean untuk meningkatkan operasi warehouse di industri manufaktur ( Implementation of lean concept to improve warehouse operation in manufacturing industry ),” vol. 14, no. 1, pp. 1–9, 2022.
A. Abideen and F. B. Mohamad, “Improving the performance of a Malaysian pharmaceutical warehouse supply chain by integrating value stream mapping and discrete event simulation,” J. Model. Manag., vol. 16, no. 1, pp. 70–102, 2021, doi: 10.1108/JM2-07-2019-0159.
H. H. Purba, Mukhlisin, and S. Aisyah, “Productivity improvement picking order by appropriate method, value stream mapping analysis, and storage design: A case study in automotive part center,” Manag. Prod. Eng. Rev., vol. 9, no. 1, pp. 71–81, 2018, doi: 10.24425/119402.
I. License, “Internal Logistics Process Improvement through AGV Integration at TMMI,” 2022.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Jurnal Ilmiah Manajemen, Bisnis dan Kewirausahaan
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
